1 - 100 Micron Sintered Stainless Steel Filter 316l Mesh Cylindrical

6. The whole equipment processing system is equipped with automatic control system and equipment fault alarm system, which is safe and reliable in operation and easy to operate. There is no need for dedicated personnel to perform duties, and only need timely equipment maintenance.

Sintered Metal Filter Property:

Sintered Metal Filter Introduce:

The filter element is made of standard five-layer sintered mesh by superposition and vacuum sintering. Stainless steel sintering network filter material is stainless steel sintering network, sintering network is divided into protective layer, filter layer, decentralised, skeleton, skeleton layer five parts, which is both homogeneous and stable filtration precision and the filter material has higher strength and stiffness, high pressure strength and filtration precision requiring uniform is a kind of ideal filter material.

The most important difference between stainless steel sintered mesh filter elements and other filter elements is the use of a large number of high precision welding process. The stainless steel mesh sintered filter element is made of sintered filter cartridge through cutting and high precision welding. The most important point of the sintered filter cartridge is that it adopts a lot of high-precision welding technology. The sintered filter cartridge adopts the coil treatment for joint welding, and the welding place should ensure roundness. After welding, the welding seam can be modified to make the whole look more beautiful.

Stainless steel sintering network filter the selection of raw materials, the precision of control, and welding processing is the filter in the late three important factors, the products on the market the sham as the genuine, inferior materials, with low charge and high filtration precision, rough processing technology, makes some products quotation is extremely low, customers need to polish eyes, in order to avoid a pyrrhic victory, production accident loss.

Sintered Metal Filter Manufacturing Technique:

The stainless steel sintered metal mesh shall be welded after being rolled round, and the roundness shall be ensured for welding. After welding, the weld shall be smoothed, so as to make the whole look beautiful and prepare for the next step of integral welding.

Then, the sintered net is welded on both ends of the cap through the stainless steel wire. During the welding process, the sintered net cannot be burned out to prevent local burn out and breakdown, thus causing the filter element to fail to perform filtration. Therefore, argon gas protection must be carried out for the welding environment during the welding process. In the above welding process, all welding tooling and special welding equipment must be installed, and the welding technology requirements for workers are also relatively strict. In case of air leakage in the bubble test within the pressure range after welding, the filter elements will all be scrapped.

Stainless steel sintering filter material of production process is complex, expensive, but the use effect is good, and can be repeatedly used, so the long term business accounting the price also is not high, in addition, if choose the product specifications, we often produce such specifications of the filter, we often do, tooling and welding equipment, skilled workers, the price would be low, also can shorten the time limit, if non standard models, you need to open new mold, and production tools and other auxiliary equipment, the cost would be higher.

The Product Shipping:

The Product Packaging: