|
Product Details:
Payment & Shipping Terms:
|
| Length:: | 10mm | Thickness:: | 0.2-1.0mm |
|---|---|---|---|
| Width: | 0.2mm | Warranty:: | 6 Months |
| Mesh Count:: | 2-635 Mesh | Model Number: | 5mm-1000mm |
| High Light: | 10mm cylindrical filter cartridge,sintered cylindrical filter cartridge,plain weave cylindrical filter cartridge |
||
Stainless Steel Plain Weave Sintered Wire Mesh Cylindrical Filter Cartridge:
Sintered Metal Filter Feature:
(1) Good strength: It has extremely high mechanical strength and compressive strength due to the support of the fourth and fifth layers.
(2) Easy to clean: as the surface filter material is used, it has the characteristics of cleaning, especially suitable for backwashing.
(3) Easy to process: suitable for cutting, bending, stamping, drawing, welding and other processing technology.
(4) High temperature resistance: it can withstand the high temperature of 480℃
(5) Corrosion resistance: SUS316L and 304 are used, so the corrosion resistance is strong.
(6) Filtration accuracy: The range of filtration accuracy is 1 -100, all of which have reliable filtration performance.
(7) Stability: Due to the upper and lower two layers of screen for protection, adding diffusion and solid melting sintering process of the filter mesh is not easy to deformation.
Sintered Metal Filter Application:
(1) Materials used for dispersion cooling in extremely high temperature environment.
(2) For the application of uniform gas in powder industry, fluidized plate in iron and steel industry.
(3) For gas distribution fluidized bed orifice plate materials.
(4) It is used in the pulverized coal pulverized coal injection and dense phase conveying system.
(5) Filtration, washing and drying of materials in the pharmaceutical industry.
(6) The catalyst supports the barrier.
(7) Used for polyester, oil, food and beverage, chemical fiber products filtration, also used for water treatment and gas filtration.
Sintered Metal Filter Introduce:
1. The end cover of the anti-corrosion filter core is molded by injection, with a nylon reinforcement layer. The filter core is quickly pasted with formic alcohol resin.
2. Butyl rubber seal ring guarantees absolute sealing and high temperature resistance up to 120° c.
3. Stainless steel framework perforated cylindrical design, the strength is far greater than that of electroplated steel, two-way 7bar pressure resistance.
4. The particle pre-filtration layer is wound on both sides of the filter material to ensure the particle filtration and increase the strength of the filter material.
5. Borosilicate fiber filter material is resistant to high temperature and chemical corrosion, and has a high void ratio to ensure efficient filtration and minimum pressure loss.
6, polyester fiber liquid layer, this material can "capture" the filter layer formed by small oil droplets, and rapid settlement of the filter under the lower part, to avoid flow with the airflow. Significantly different from foam materials, polyester materials have stronger toughness, avoiding damage and contaminating the downstream air.
7. It should be known that for every 0.14 KGF /cm increase in pressure drop, power input will increase by 1%.
8. The filter element shall always remain at the low pressure drop level and not be saturated during the specified life.
9. Compared with other brands, it has stronger pollutant removal ability but lower pressure drop.
Sintered Metal Filter Property:
| Length: | 10mm |
| Thickness: | 0.2-1.0mm |
| Width | 0.2mm |
| Warranty: | 6 months |
| mesh count: | 2-635 Mesh |
| Model Number | 5mm-1000mm |
The Product Shipping:
The factory pictures:
Contact Person: Hu
Tel: 008617367951718
Fax: 86-0318-8062880
